Optimization of an Alkaline Hydrolysis Preparation of Capilliposide-A from Lysimachia capillipes Hemsl. Using Response Surface Methodology Coupled with HPLC-ELSD Analysis

Capilliposide-A, a rare secondary saponin found in Lysimachia capillipes, has been reported to exhibit good biological activities. However, it is difficult to obtain a sufficient of capilliposide-A for further research through column chromatography and chemical synthesis. The aim of this work was to establish an efficient approach for the convenient preparation of this steroid saponin based on alkaline hydrolysis. The hydrolysis conditions were optimized by response surface methodology after a preliminary investigation of the affecting factors by single-factor experiments. Under the optimal conditions, the macroporous resin that adsorbed capilliposide-B and capilliposide-C was hydrolyzed in an 8% (w/v) NaOH solution at 35 °C for 65 h, and the yield of capilliposide-A was 68.90%. The results demonstrated that this newly developed approach is efficient for the preparation of capilliposide-A, and this approach is also crucial for further development and clinical applications.

     

One-pot synthesis of CuO/TiO2 nanocomposites for improved photocatalytic hydrogenation of 4-nitrophenol to 4-aminophenol under direct sunlight

The excellent photocatalytic hydrogenation of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) with NaBH₄ in the aqueous medium is still a big challenge. Herein, we report a facile one-pot evaporation-induced self-assembly (EISA) method to synthesize a series of CuO/TiO₂ nanocomposites. The as-synthesized CuO/TiO₂ photocatalysts exhibit remarkable catalytic activity under direct sunlight in selective hydrogenation of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) due to the synergistic interaction of guest copper nanoparticles with host titanium dioxide (TiO₂) species. Especially, 5 wt% CuO/TiO₂ nanocomposite revealed superior reaction rate constant (k) value (0.306 min⁻¹) when compared to 3 wt% CuO/TiO₂ (0.192 min⁻¹) and 7 wt% CuO/TiO₂ (0.240 min⁻¹). Moreover, several characterization techniques (XRD, TEM, N₂ adsorption–desorption isotherm, DRS, and XPS) were executed to deeply investigate the effect of copper content on the bulk and interfacial properties of the catalysts. The characterization results proved that the superior photocatalytic hydrogenation over 5 wt% CuO/TiO₂ catalyst can be ascribed to moderate CuO loading as well as even dispersion of CuO species on the surface of active TiO₂ host, which can largely improve the light absorption ability within visible light region. Besides, the 5 wt% CuO/TiO₂ catalyst exhibits remarkable recyclability and durability, retaining its superior activity (above 95%) up to several repeating cycles, proving its practical applicability for hydrogenation reactions at domestic and industrial levels.     

980 nm Photobiomodulation Promotes Osteo/Odontogenic Differentiation of the Stem Cells from Human Exfoliated Deciduous Teeth Via the Cross talk Between BMP/Smad and Wnt/β-Catenin Signaling Pathways

Increasing evidence suggests stem cells from human exfoliated deciduous teeth (SHEDs) serve as desirable sources of dentin regeneration. Photobiomodulation (PBM) has shown great potential in enhancing the proliferation and osteogenesis of human bone marrow mesenchymal stem cells (hBMMSCs). However, the specific role of PBM in odontogenic differentiation of SHEDs is little know, and we further investigated potential mechanism of PBM osteo/odontogenisis. A 980 nm diode laser with different energy densities of (0.5, 5, 10 J cm⁻²) in a 100-mW continuous wave was used for irradiation every 24 h. Osteo/odontogenic differentiation of SHEDs was achieved by performing alkaline phosphatase (ALP) and alizarin red staining (ARS) and osteo/odontogenic markers were also evaluated by qRT-PCR and western blotting. Additionally, western blot and immunohistochemical staining were performed to evaluate the levels of BMP/Smad and Wnt/β-catenin signaling-related proteins. We found that PBM at 5 J cm⁻¹ increased mineral deposition and upregulated the expression of related osteo/odontogenic markers along with the elevated expression of β-catenin and phosphorylation level of Smad1/5/9. Furthermore, Wnt signaling inhibition using DKK1 and BMP signaling inhibition using noggin inhibited PBM-induced osteo/odontogenic marker expression when used individually or jointly. In conclusion, PBM induces the osteo/odontogenic differentiation of SHEDs through cross talk between BMP/Smad and Wnt/β-catenin signaling pathways.     

Plasmon-Enhanced Electrochemiluminescence at the Single-Nanoparticle Level

Plasmon-enhanced electrochemiluminescence (ECL) at the single-nanoparticle (NP) level was investigated by ECL microscopy. The Au NPs were assembled into an ordered array, providing a high-throughput platform that can easily locate each NP in sequential characterizations. A strong dependence of ECL intensity on Au NP configurations was observed. We demonstrate for the first time that at the single-particle level, the ECL of Ru(bpy)₃²⁺-TPrA was majorly quenched by small Au NPs (<40 nm), while enhanced by large Au ones (>80 nm) due to the localized surface plasmon resonance (LSPR). Notably, the ECL intensity was further increased by the coupling effect of neighboring Au NPs. Finite Difference Time Domain (FDTD) simulations conformed well with the experimental results. This plasmon enhanced ECL microscopy for arrayed single NPs provides a reliable tool for screening electrocatalytic activity at a single particle.     

Controllable Preparation of Branched Polyolefins with Various Microstructural Units via Chain-walking Ethylene and Pentene Polymerizations

Chinese Journal of Polymer Science - Branched polyolefins with controllable topology structures were generated from the chain-walking (co)polymerizations of ethylene, 1-pentene (1P) and 2-pentene...     

定量核磁共振氢谱法测定枸橼酸托法替布片的有效含量

建立了枸橼酸托法替布片中有效含量的定量核磁共振氢谱测定方法。以托法替布化学位移δ 7.13为定量峰,3,5-二甲基吡唑化学位移δ 5.73为内标峰,氘代二甲亚砜（DMSO-D6）为溶剂,使用核磁共振谱仪采集混合物的氢谱,对枸橼酸托法替布片中的有效成分进行定量测定。该方法专一性强,在0.793～7.925 mg/mL范围内呈现良好的线性关系（r2=0.998 4）。精密度、重复性和稳定性的相对标准偏差（RSD）分别为0.82%、1.7%和0.67%。该方法测得的枸橼酸托法替布片中托法替布的质量分数为2.25%,其结果与高效液相色谱法基本一致。定量核磁共振氢谱法具有操作方便简单,可同时进行定性与定量,检测时间短,无需对照品等优势,可用于枸橼酸托法替布片有效含量的测定。     

Two-dimensional Supramolecular Polymers Based on Selectively Recognized Aromatic Cation-π and Donor-Acceptor Motifs for Photocatalytic Hydrogen Evolution

Two-dimensional (2D) organic polymers have recently received considerable interest, especially those whose architectures are held together via supramolecular engineering. However, current approaches toward supramolecular 2D structures usually suffer from mutual interference of noncovalent interactions and lack of intrinsic functions. Herein, we report well-regulated 2D supramolecular polymers (2DSPs) through an aromatics-selective recognition strategy of cation-π and donor-acceptor (D-A) motifs, which are derived from C₄-symmetric cationic monomers and electron-withdrawing molecules. By subtly designing the strength and direction of noncovalent driving forces, the mutual interference between cation-π and D-A interactions is effectively avoided, enabling the construction of 2DSPs in aqueous solution. On this basis, the resultant 2DSPs possess boosted photocatalytic hydrogen evolution activity at a rate of 600 μmol g⁻¹ h⁻¹, which is mainly ascribed to the specific stacking mode of cation-π/D-A motifs and the ordered 2D structures.     

Inside Cover: Acid-catalyzed Disulfide-mediated Reversible Polymerization for Recyclable Dynamic Covalent Materials (Angew. Chem. Int. Ed. 11/2023)

Poly(1,2-dithiolane)s are a family of intrinsically recyclable polymers due to their dynamic covalent disulfide linkages. Despite the common use of thiolate-initiated anionic ring-opening polymerization (ROP) under basic condition, cationic ROP is still not exploited. Here we report that disulfide bond can act as a proton acceptor, being protonated by acids to form sulfonium cations, which can efficiently initiate the ROP of 1,2-dithiolanes and result in high-molecular-weight (over 1000 kDa) poly(disulfide)s. The reaction can be triggered by adding catalytic amounts of acids and non-coordinating anion salts, and completed in few minutes at room temperature. The acidic conditions allow the applicability for acidic monomers. Importantly, the reaction condition can be under open air without inert protection, enabling the nearly quantitative chemical recycling from bulk materials to original monomers.     

Solvent-Free Heterogeneous Catalytic Hydrogenation of Polyesters to Diols

The utilization of carbon resources stored in plastic polymers through chemical recycling and upcycling is a promising approach for mitigating plastic waste. However, most current methods for upcycling suffer from limited selectivity towards a specific valuable product, particularly when attempting full conversion of the plastic. We present a highly selective reaction route for transforming polylactic acid (PLA) into 1,2-propanediol utilizing a Zn-modified Cu catalyst. This reaction exhibits excellent reactivity (0.65 g g_cat⁻¹ h⁻¹) and selectivity (99.5 %) towards 1,2-propanediol, and most importantly, can be performed in a solvent-free mode. Significantly, the overall solvent-free reaction is an atom-economical reaction with all the atoms in reactants (PLA and H₂) fixed into the final product (1,2-propanediol), eliminating the need for a separation process. This method provides an innovative and economically viable solution for upgrading polyesters to produce high-purity products under mild conditions with optimal atom utilization.